IS08XXTB3B Switch Guide – Everything You Need to Know

Introduction to IS08XXTB3B

The IS08XXTB3B is a model identifier often linked to the industrial-grade pushbutton switches manufactured by IDEC Corporation, a leading provider of automation and control components. This guide provides a comprehensive overview of the IS08XXTB3B, including its technical specifications, wiring diagrams, installation procedures, and common use cases in various industries. Whether you’re an engineer, technician, or procurement specialist, understanding how the IS08XXTB3B functions can help you choose the right component for your control systems.

---

Product Overview and Model Breakdown

The model code IS08XXTB3B represents a series of high-performance, panel-mounted industrial switches designed for durability and reliability in harsh environments. These switches are part of IDEC’s IS series, known for their compact design and high electrical capacity. While the precise variant “IS08XXTB3B” may refer to a specific sub-model or distributor SKU, it closely matches the structure of known products like the IS-08-B3-03, suggesting compatibility in specifications and use.

The IS08XXTB3B is generally used for operations involving machinery start/stop, system resets, or safety circuit interruptions. Its compact form allows for easy panel integration without sacrificing performance.

---

Technical Specifications of IS08XXTB3B

To better understand how the IS08XXTB3B fits into your system, here’s a breakdown of its technical specifications. These values may vary slightly depending on the exact sub-model, but the table below presents standard specs for this type of switch:

Attribute	Value
Model Number	IS08XXTB3B / IS-08-B3-03
Voltage Rating	250V AC
Current Rating	3A (AC-15)
Contact Configuration	SPDT (Single Pole Double Throw)
Operating Temperature	-25°C to +70°C
Mechanical Life	Over 1 million operations
Mounting Type	Panel Mount
Protection Rating	IP65

These specs make the IS08XXTB3B suitable for a variety of control panel and automation applications, especially where compact size and long life are essential.

---

Wiring Diagram and Installation

Installing the IS08XXTB3B is relatively simple, but accuracy is key to ensure safe and efficient performance. Begin by preparing the panel where the switch will be mounted. A cutout of the appropriate diameter—usually 16mm or 22mm depending on model—should be made.

Next, insert the switch body into the panel and secure it with the mounting nut. The terminals at the rear should be connected to your system’s circuit as per the configuration—typically SPDT for this model. The center terminal acts as the common point, while the normally open (NO) and normally closed (NC) terminals determine the switching logic.

Always ensure that power is off during installation to prevent electrical shock or equipment damage. After wiring, verify the connections and perform a functional test before putting the system into full operation.

---

Applications and Use Cases

The IS08XXTB3B is designed for versatility, and you’ll find it in a wide range of industrial applications. Its main purpose is to serve as an interface between a user and a machine—especially where an action needs to be triggered quickly and reliably.

Common uses include:

1. Factory automation – to initiate or stop motor drives, actuators, or sequences.
2. Control panels – for visual and manual feedback.
3. Transport systems – in vehicle control stations or elevators.
4. Packaging machines – for triggering, resetting, or interlocking mechanisms.
5. Medical and laboratory equipment – requiring clean, precise operations.

Because of its high IP65 rating, the IS08XXTB3B is also suited for slightly wet or dusty environments.

---

Certifications and Compliance

The IS08XXTB3B, like most industrial components from IDEC, meets international safety and performance standards. It is often certified for:

• CE (Conformité Européenne) – ensuring it meets EU safety, health, and environmental requirements.
• RoHS Compliance – indicating it’s free of hazardous substances.
• UL and CSA – for use in the United States and Canada.

Always check your specific variant’s datasheet for regional certifications if compliance is crucial to your application.

---

Maintenance and Troubleshooting

Maintenance of the IS08XXTB3B is minimal due to its sealed design, but occasional inspection can prolong its lifespan. Here are typical maintenance tips:

• Clean external surfaces with non-abrasive, dry cloth.
• Check for physical damage, wear on the actuator, or terminal corrosion.
• If tactile response weakens, consider replacing the unit.

In terms of troubleshooting, common issues include non-responsive switching, which might be caused by loose terminals, burned-out contacts due to overload, or incorrect wiring. If the switch fails mechanical tests, replacement is recommended.

---

Comparisons with Similar Models

Understanding how the IS08XXTB3B compares to other models can help you choose the best one for your needs.

Feature	IS08XXTB3B	Omron A165E	Schneider XB5
Voltage Rating	250V AC	240V AC	240V AC
Contact Type	SPDT	SPST / DPDT Options	SPDT / DPDT
IP Protection	IP65	IP66	IP67
Mounting Size	16mm / 22mm	16mm	22mm
Life Span (Clicks)	1 million+	500,000	1 million+

If you need even higher protection or tactile feedback, Omron and Schneider offer comparable alternatives—but often at higher cost or with bulkier designs.

---

Where to Buy and Sourcing Tips

You can find IS08XXTB3B switches from reliable distributors such as:

• Mouser Electronics
• Digi-Key Electronics
• RS Components
• Allied Electronics

Always verify the manufacturer part number before purchase to avoid counterfeits. For bulk orders, reach out directly to the manufacturer or authorized dealers to request better pricing and availability.

---

PDF Datasheet and Technical Resources

If you need detailed mechanical drawings, terminal layouts, or electrical curves, the official datasheet is your best resource. You can typically download it from IDEC’s official website or distributor portals like Mouser or Digi-Key.

Look for:

• Technical datasheets
• Mounting and panel cutout diagrams
• Compliance certificates
• Application notes

---

Additional FAQs (Not Covered in Main Content)

1. Can I use IS08XXTB3B in outdoor environments?
Yes, if the enclosure is rated accordingly. While the switch itself has IP65 protection, full outdoor use requires weatherproof housing.

2. What tool is needed to mount IS08XXTB3B switches?
Typically, only a mounting nut wrench or pliers for tightening. Electrical connections may require a screwdriver.

3. Is the switch illuminated?
Some variants of this series offer LED-illuminated actuators. Confirm with the datasheet.

4. Can it be used in low-voltage DC circuits?
Yes, though the lifespan may vary. Check contact ratings in the datasheet for DC applications.

5. Is this model available in different colors or actuators?
Yes. The IS series often comes with options like red, green, black, and with momentary or latching actions.

---

Conclusion

The IS08XXTB3B is a reliable, versatile, and durable switch used across numerous industries for controlling electrical functions. With its compact form, high IP rating, and long operational life, it’s a great choice for control panels, automation, and industrial systems. This guide has covered everything from wiring to sourcing and comparisons, making it your go-to resource for all things IS08XXTB3B. For detailed specs or custom solutions, always refer to the official datasheet or consult with the manufacturer.

Recommended Articles:

• Mastering NoteEffective4761: The Ultimate Guide to Boosting Your Productivity
• The Ultimate Guide to SwipeSparkleeus.com: Eco-Friendly Cleaning & Decluttering
• Thrifty-Events.net: Your Go-To Guide for Affordable Event Planning
• Ultimate Guide to the AWM99V Washing Machine: Features, Reviews & Buying Advice
• What is Higopo.com? A Complete Guide to the Platform, Services, Legitimacy & Safety